Longitudinal Sway Bracing
Longitudinal Sway Bracing
A device to prevent pipe breakage caused by excessive shaking in case of earthquake Installed in the fire main and cross piping without exceeding the maximum interval of 24m between the braces, and the distance between the last brace and the end does not exceed 12m.
- Installable angle: 30˚ ~ 90˚
- Installation piping specifications: 50A ~ 200A
- Low ceiling and CPVC a combined use Inventory management is easy
- Minimum installation height 173 m
- Convenient visual identification via bolt head
| Support length(KS) | Support length | 30˚ ~ 44˚(Nｍ) | 45˚ ~ 59˚(Nｍ) | 60˚ ~ 74˚(Nｍ) | 75˚ ~ 90˚(Nｍ) |
|---|---|---|---|---|---|
| 50A | 3,200 | 2,224 | 3,145 | 3,852 | 4,448 |
| 65A | 3,200 | 2,224 | 3,145 | 3,852 | 4,448 |
| 80A | 3,200 | 2,224 | 3,145 | 3,852 | 4,448 |
| 100A | 3,200 | 2,224 | 3,145 | 3,852 | 4,448 |
| 125A | 3,200 | 3,559 | 5,033 | 6,164 | 7,117 |
| 150A | 3,200 | 3,559 | 5,033 | 6,164 | 7,117 |
| 200A | 3,200 | 4,482 | 6,338 | 7,763 | 8,963 |